Following Submarine Matters' German vs Swedish Advanced AIP for Submarine Sales to Poland, the Netherlands and India of September 16, 2019, Anonymous has kindly provided the
following comments on the Type 212CD under development for the
German and Norwegian navies.
Anonymous (with some editing and comments by Pete)
Information on the Type 212CD (Common
Design) is limited. The 212CD:
i) is a Norwegian-German TKMS joint
development with Norway purchasing 4 and Germany 2. Deliveries are expected in
2016 [1]. The 212CD are based on the
Types 212A and 214
ii) will have a displacement of 2,400 tons [source? displacement not in 4 .
This is similar in size to the Netherland’s Walrus-class (see Table in [4], displacement of 2,400-3,000 tons, [or less see right sidebar] and
hull is made out of non-magnetic steel [1][3],
iii) will have extended range, speed and
endurance(6 to 8 weeks) [2] [3, 4].
Hence it will use two MTU 12V 4000s because just one diesel (used in the 212A)
is not suitable or safe for long range operation. To accommodate the two MTU
diesels the beam/diameter has been enlarged to 8m. This is an increase from the
212A 6m beam useed for just one MTU 396 diesel
iv) use of SAFT
made lithium iron phosphate batteries (LFP) is likely [source?]. This is more stable [than other LIBs and/or more stable than LABs?] at the
low Baltic and North Sea, North Atlantic and Arctic Ocean temperatures the
212CD will operate in.
v) The latest Permasyn magnetic propulsion
motor will be used.
vi) As with the 212A and 214 for safety
the AIP oxygen tanks and hydrogen cylinders are outside the pressure hull and inside the light outer hull. The
212CD will use fourth generation fuel cell (FC4G) AIP
vii) Italy, the
Netherlands [1] and Poland could buy
into the 212CD program (does it satisfy their requirements?) [5]. But, published data on 212A and
214 may provide some important information on 212CD [6].
[1] “The Royal Netherlands Navy’s Submarine
Replacement Programme”, European Security
and Defense, May/09/2019, https://euro-sd.com/2019/05/articles/13140/the-royal-netherlands-navys-submarine-replacement-programme/
“The Type
212CD followed the [curtailed Type 212NG (Next Generation) program], a design
by tkMS for the German Navy. In turn, the NG was derived from the Type 212A and
the Type 214. When Norway joined the programme, the requirements were merged
into a new design: Type 212 Common Design. Not much has been disclosed about
these submarines, except that their displacement is 2400 tons and their hulls
are made of amagnetic steel.”
[2] “German-Norwegian Type 212 CD submarine
contract to be signed early 2020”, NAVAL
TODAY. COM, Jun/014/2019, https://navaltoday.com/2019/06/14/german-norwegian-type-212-cd-submarine-contract-to-be-signed-early-2020/
“The new
Type 212 CD submarines will share the low signatures of the Type 212 boats in
service with the navies of Germany and Italy but will have extended range,
speed and endurance to allow worldwide operations, according to TKMS.”
[3] “U 212 CD, the next Norwegian submarine, but
what for? (1/2)” , DefenceChronicles,
https://www.defencechronicles.eu/u-212-cd-the-next-norwegian-submarine-but-what-for/
“Of course,
in terms of the RNN submarines’ capabilities, the Norwegian Sea surveillance
mission is very demanding since they must keep submerged almost permanently in sectors
of the North Norwegian Sea or along some fjords. This requires endurance at sea
(6 to 8 weeks), keeping watch in a patrol area between two long dived
snorkeling transits on the way out of the home base and on the way back.”
[4] “U 212 CD, the next Norwegian submarine, but
what for? (2/2)” https://www.defencechronicles.eu/u-212-cd-the-next-norwegian-submarine-but-what-for-22/
“By
selecting the U 212 German class, the Norwegian MOD made certainly the best
choice of a coast guard submarine, while objectively giving up the ambition to
extend its Navy control to the open Norwegian Sea and play a combined role with
other friendly ocean going submariners, in the hunt for the new “Red Octobers”.
Also see Table.
[5] “German, Norwegian officials huddle over joint
submarine program” https://www.defensenews.com/global/europe/2019/04/30/german-norwegian-officials-huddle-over-joint-submarine-program/
“The design
of the new boats has yet to be locked down, which may reflect a last glimmer of
hope in Berlin and Oslo that other countries in the market for submarines —
namely Italy, the Netherlands or Poland - could join the effort.”
[6] The TYPE 212A is a small and stealthy submarine design. Both oxygen tanks and
hydrogen cylinders are stowed outside of the pressure hull on [safety grounds].
In line with the stealth, extensive use is made of non-magnetic steel, supplemented by
lightweight [graphite fiber reinforced plastic] GFRP for hull outer
coverings and the fin. TYPE 214 is described as an evolution of the TYPE 209 with the
addition of a number of innovations found in [later model 209s].
Pete
Comment: I estimate "2,400 tons" displacement for the 212CD for the Norwegian and German navies to be too high for the shallow Baltic. Perhaps 2,200 tonnes submerged may be more accurate. This is similar to TKMS latest launched 2 or 3 diesel Singaporean Invincible (was 218) class. The Invincible/218 for the shallow Malacca and Singapore Straits is estimated at 2,000 tonnes (surfaced), 2,200 tonnes (submerged). The
212CD is likely to have X-plane rudders (below) like the 212A and Invincible class. The the photos of Invincible/218 model
above and below may be most like the future Type 212CD.
12 comments:
Hi Pete
Currently, TKMS has two design of submarine, Type 209 and Type 212A. Type 214 submarine is an evolution of Type 209 submarine, which was designed in decades ago [1], with addition of a number innovation found in Type 212A. Type 218 is an evolution of Type 214.
Type 212A, the Baltic Sea specific submarine features small and non-magnetic with one diesel and twelve torpedoes. In a viewpoint of business [2], Type 212CD will be larger than Type 212A to equip two diesels and more torpedoes.
[1] https://en.wikipedia.org/wiki/Type_209_submarine#cite_note-directorysub-8
[2] German Navy is said to purchase two Type 212CDs until 2026. But, six Type 212As of German Navy are half-dysfunctional because of budget and crew shortages. In such a situation, does German taxpayer admit purchasing of additional two submarines? If possibility of submarine purchasing by German Navy is very low, its requirements (Baltic specificities) will be neglected in design of Type 212CD.
Regards
Hi Anonymous
The details in your comment about the Type 209, 212A, 214 and 218 look correct. Not forgetting Israel's Dolphin 1 derived from the 209 and Dolpin 2 from the 214.
But how did you, or someone else, calculate the 212CD would have a beam of 8m (or 8.4m) and that the 212CD will weigh 2,400 tons? Is that short tons, long tons or metric tonnes?
Regards
Pete
As diesels should be maintained under the mission for oceanic submarine, enough space for diesel section is needed. The space of diesel section for Warlus submarine, which equips three diesels inside of double hull structure, is extremely tight [1], therefore, this space must be improved for next Netherlands submarine.
Case 1: oxygen tanks and metal hydride cylinders outside of pressure hulls (212A style).
Outer diameter of diesel section should be at least 1m wider [2-4]. This means beam of 212CD is 7.8m (=6.8m+1m). In this case, maintainability of diesel is not as good as case 2 (is still better than Warlus?), but, higher safety.
Case 2: [with the correction] oxygen tanks inside of pressure hull and metal hydride cylinders outside of pressure hull (214 style).
For better maintainability, space between diesel-diesel should be 40-50cm wider (beam of 7.5-7.8m = 6.3m+40-50cm x 3 [5] ) than that of Type 214 submarine.
Considering Case 1 & 2, beam of ca.8m is reasonable value (=ca. 15% wider). Increase of 15% in beam means increase of 30% in displacement (2000t for Type 214 become 2600t for wider beam).
[1] https://naviesworldwide.com/navy-news/do-conventional-submarines-need-diesel-engines/
Diesel engines take up a lot of space, require staff and maintenance. (Photo: Jaime Karremann / Marineschepen.nl)
[2] http://gentleseas.blogspot.com/2019/02/tkms-type-212cd-submarine-propulsion.html
From comparison outer diameter of control section known as 6.8m and inner diameter of diesel section in 212A cutaway, outer diameter of diesel section is estimated about 5.3m. As beam of Type 214 submarine is 6.3m, beam of 212A should be at least 1m wider for installation of two diesels.
[3] https://en.wikipedia.org/wiki/Type_214_submarine
Beam of Type 214 submarine is 6.3m (General characteristics).
[4] https://ameblo.jp/calorstars/entry-12157790493.html
Pictures of installation of diesels in Hyundai made Type 214 submarine. These pictures show tightness of diesel section.
[5] Distance between diesel-diesel for Japanese submarine whose diesels are maintained under the submarine mission seems to be more than 40cm wider.
Thankyou Anonymous
For you comprehensive comment (of September 25, 2019 at 7:15 PM) about TKMS Type 212A, 214 and 212CD pressure hull matters and measurements.
Your comment is worthy of an article, which I will publish soon).
Regards
Pete
Hi Pete
Looks like the Philippines have Submarine Ambitions on their minds and they think they can cut a deal with France on the Scorpene class SSK.
Philippine Navy eyes to have first submarines by 2027
https://newsinfo.inquirer.net/1168447/philippine-navy-eyes-to-have-first-submarines-by-2027
Addition to comment (September 24, 2019 at 8:38 PM)
[6] http://japanese.china.org.cn/politics/txt/2012-09/16/content_26536166_12.htm, “Inside of diesel section for Oyashio class submarine”
Double hull structure consisted of outer light hull (outer diameter of 9.1m) and inner pressure hull (outer diameter of ca. 7.2m?) is adopted for diesel section of Oyashio-class (also Soryu class), where two diesels (KAWASAKI 12V25/25) with 12 square-shaped cylinder head covers across the passage are installed. As bore of 12V/25/25 is 250mm, width of the passage estimated ca.1.2 m which is considerably bigger than those of Type 214 [2] or Warlus [1]. Bigger space of diesel section facilitates maintenance of diesels during the mission period (such as 10weeks) for an oceanic submarine.
Thanks Nicky
The Philippines with its healthy economic growth is now buying new surface ships and patrol boats rather than relying on 40-50yo US Coastguard cutter handmedowns.
So submarines appear to be on the Phillipines' list, to keep up with Malaysia's 2 (DCNS now Naval Group) Scorpenes and Indonesia's 3+ South Korean DSME Chang Bogos (TKMS designed Type 209s). The Philippines nominal GDP is now greater than Vietnam's (with Vietnam recently buying 6 new Kilo subs). https://en.wikipedia.org/wiki/List_of_countries_by_GDP_(nominal)
The Philippines may have sent some future submariners to France for training. But I would not be surprised if the Philippines still tries to play off France's Naval Group against South Korea's DSME to deliver the cheapest subs with the largest commissions for Filipino officials and poliliticians. Maybe Russia's Kilos are still an outside contender.
Regards
Pete
Hi Anonymous
Thanks for the extra details at September 26, 2019 at 10:45 AM.
I'll add them into the SubMatts article set for tomorrow.
Regards
Pete
Hi Pete
Question for ya, do you think the Philippines can afford a Scorpene class SSK or the Chang Bogo class SSK with ot without a soft loan from them. What about the Improved Kilo class SSK, can you see them getting the Improved Kilo class SSK within their budget.
Hi Nicky
This reference discusses possibility of French Government owned Naval Group providing soft loans https://www.facebook.com/MaxDefense/posts/951780294992628?comment_id=953026821534642
South Korea provided soft loans for Philippines infrastructure in 2018 http://overseas.mofa.go.kr/ph-en/brd/m_3284/view.do?seq=759480 maybe its been extended to this SK built frigate exports to the Phils https://en.wikipedia.org/wiki/Jose_Rizal-class_frigate maybe to Chang Bogo exports in future.
If the Russians have the money and want some strategic leverage over the Phils then soft loans for Kilos - maybe.
BUT the main thing Philippine officials and politicians may be looking for are healthy commissions (some call it bribes - "Mr 10%") for acting as middlemen in any submarine deal.
Cheers
Hi Again Nicky
Talking of "commissions" aka "bribes" to win a submarine contract, check out
https://www.irishtimes.com/news/world/europe/a-murky-tale-of-arms-sales-and-kickbacks-reaches-court-in-paris-1.4041899 of 6/7 October 2019 :
[French] "Commissions on the sales of three Agosta class submarines to Pakistan and four Sawari II frigates to Saudi Arabia came to a staggering €327 million. François Léotard, who was [French] defence minister at the time, argues that the commissions were “decisive” in sealing the contracts."
"The commissions – essentially bribes to Pakistani and Saudi officials – were written off as “exceptional commercial expenses” and were arguably not illegal at the time. The middlemen in the K network, Takieddine, Ali Ben Moussalem and Abdul Rahman Al-Assir, received €33 million.""
In Australia there appears to be no discernable tradition of "commissions" to win arms contracts, rather former senior (officers, politicians and officials) are possibly offered well-paying jobs.
Hi Pete
HDW Class 212CD E(Expeditionary) (https://www.youtube.com/watch?v=7uPe_s0Dfng):
Oxygen tanks are installed inside of the pressure hull, and two or three diesels are installed.
Germany Navy insisted minimal size of submarine as a best choice and deployed 214A, but, it is going to buy two bigger 212CDs. Does Germany Navy suffer from schizophrenia?
Regards
Post a Comment