Could this be described as a piezorubber (polymer) coating?
(Diagram unrelated to Sputnik or Russian defence industry).
---
Russia's Sputnik news reports September 30, 2016 https://sputniknews.com/military/20160930/1045884198/submarine-antenna-sonar-stealth.html:
"New Antennas to Make Russian Submarines Invisible to Sonars"
"Russian submarines are going to be outfitted with new unique piezoceramic coating antennas capable of intercepting and distorting signals emitted by enemy sonars.
"Russian submarines are going to be outfitted with new unique piezoceramic coating antennas capable of intercepting and distorting signals emitted by enemy sonars.
The new invention, developed by [the] OceanPribor Concern and
the Krylov Research Center, under the auspices of the Foundation for Advanced Research Projects, is essentially a polymer membrane designed to cover the
entire hull of a submarine.
These new antennas are expected to be installed both on the next
generation submarines and on the submersibles that are already employed by the
Russian Navy.
A source in the [Russian] Defense Ministry, [who is] privy to the
development of the new antenna, told Russian newspaper Izvestia that the work
is proceeding as planned, and that testing is expected to begin soon:
"We’re talking about a polymer membrane based on lead,
titanium and zirconium oxides that can both absorb and transmit a signal.
Essentially, this piezorubber coating transforms the submarine’s entire hull
into a hydroacoustic antenna," the source explained.
The project, designated as Korsas ('Corsair' in Russian) is
being funded by the Foundation for Advanced Research Projects, with OceanPribor
designing antennas and sensors, and the Krylov Research Center working on integrating
the piezoceramic coating into submarines’ outer plating.
The operating principle of the new antenna is fairly simple: the
membrane captures a sonar signal, analyzes and distorts it, and then sends it
back. The project’s cornerstone is a unique piezoceramic capable of absorbing
and distorting acoustic signals. According to the source, research and
development is expected to be completed by the end of the 2017."
@Pete
ReplyDeleteSo the implication is that the system could jam active sonar signals? I assume no frequency band was given over which it was effective. It seems suspect to me, given the kind of complete bullshit that comes out of Russia's press. It seems to me it would have to be frequency limited and exceedingly hard to maintain in good order, being mounted outside the hull all over. Most countries have issues just with passive anechoic tiles (RAN notably seems to do much better with theirs).
Cheer,
Josh
Expanding on the ideas introduced by Josh, some referenced material is here. many of the explanations are very technical.
ReplyDeleteTHE EMERGENCE OF LOW–FREQUENCY ACTIVE ACOUSTICS AS A CRITICAL ANTISUBMARINE WARFARE TECHNOLOGY
http://www.globalsecurity.org/military/systems/ship/systems/tyler.pdf
Hi Pete
ReplyDelete“IDE pattern of t/b on Kapton film (film not shown)” is not correct. ”IDE pattern of t/b (=top/bottom) on Kapton film (yellow film between IDEs and fibers)” is correct.
Proposed IDEs/piezo system belongs to microchip. The technology to build submarine covered by microchip is quite difficult.
Manufacturing system of such microchip on whole submarine does not exist. Idea is important, but idea without measures to realize is an impossible dream.
Regards
S